进口塑胶料
注:请在右边的搜索栏查找产品

TPU SP806-10 耐低温,抗结块,耐磨蚀

添加时间:2014-01-03  信息来源:http://www.kingoflotto.com/  作者:苏州希普能塑料

Elastollan TPU SP806-10

Elastollan® TPU SP806-10
热塑性聚氨酯弹性体(聚醚)
BASF Polyurethanes GmbH
 
产品说明
Elastollan® SP806-10 is a polyether-based thermoplastic polyurethane (TPU). It is specifically formulated for extruded profile, film and sheet applications, and has exceptional adhesion characteristics. It is naturally anti-blocking and non-tacky when extruded into film or sheet products. Elastollan® SP806-10 also exhibits the typical features of Elastollan® 1185A: excellent abrasion resistance, toughness, low temperature properties, hydrolytic stability and fungus resistance. As with all TPU products, Elastollan® SP806-10 must be dried before processing. The drying step is required to both dry the granules and also maintain a low moisture content until the product enters the processing equipment. The water content must be less than 0.03% before processing. The typical drying conditions should be 2-4 hours @ 175°-195℉ (80°-90℃). Elastollan® SP806-10 can be stored for up to 1 year in its original container. Containers should be stored in a cool and dry area.
 
含添加剂:抗结块剂
材料特点:低温韧性,低温下的柔性,抗结块性,抗菌性,良好粘结性,耐磨蚀,水解稳定
材料用途:薄膜,片材,型材
材料形式:颗粒料
加工方法:挤出
塑料牌号:TPU SP806-10
定属记号:TPU-聚醚
销售电话:185 5121 3137 谭经理
湘樟版权:http://www.kingoflotto.com/sujiao/tpu/elastollan/sp806-10.html
 
胶料物性
物理性能 额定值 单位制 测试方法
比重 1.12 g/cm³ ASTM D792
硬度 额定值 单位制 测试方法
硬度计硬度(邵氏 A) 86   ASTM D2240
机械性能 额定值 单位制 测试方法
抗泰伯磨耗(1000 Cycles,1000g,H-18转轮) 25.0 mg ASTM D1044
弹性体 额定值 单位制 测试方法
拉伸应力     ASTM D412
100%应变 8.27 MPa
300%应变 16.5 MPa
抗张强度(断裂) 34.5 MPa ASTM D412
伸长率(断裂) 590 % ASTM D412
断裂伸长率 70 % ASTM D412
撕裂强度2 104 kN/m ASTM D624
压缩永久变形     ASTM D395B
23℃,22.0 hr 25 %
70℃,22.0 hr 45 %
热性能 额定值 单位制 测试方法
玻璃转化温度(DSC) -40.0 DSC
补充信息
Softening Point,TMA Onset Temp: 155℃
挤出 额定值 单位制
干燥温度 80.0 到 90.6
干燥时间 2.0 到 4.0 hr
建议的最大水分含量 0.030 %
熔体温度 177 到 196
联系湘樟塑料
相关材料