进口塑胶料
注:请在右边的搜索栏查找产品

PVDF 31508/0009 颗粒料,挤出级

添加时间:2013-10-05  信息来源:http://www.kingoflotto.com/  作者:苏州希普能塑料
3M Dyneon Fluoroplastic PVDF 31508/0009
3M™ Dyneon™ Fluoroplastic PVDF 31508/0009
聚偏二氟乙烯
3M Advanced Materials Division
 
材料特点:共聚物,高抗撞击,良好的柔韧性,耐低温,耐化学,高耐热,收缩性低,低烟释放,阻燃
材料用途:电线电缆应用,管道,绝缘材料
产品形式:颗粒料
加工方法:挤出
Category:Polymers -- Thermoplastics -- Fluoroplastics
塑料牌号:PVDF 31508/0009
定属记号:PVDF
3 M 代理:苏州希普能工程塑料 185 5121 3137 谭经理
 
物料数据
物理性能 额定值 单位制 测试方法
密度 1.76 g/cm³ ISO 1183
熔流率     ASTM D1238
230℃/2.16kg 5 g/10 min
230℃/5.0kg 15 g/10 min
吸水率(23℃,24hr) <0.040 % ISO 62
机械性能 额定值 单位制 测试方法
抗张强度(断裂,23℃) 22 MPa ASTM D638
伸长率3(断裂,23℃) 480 % ASTM D638
弯曲模量(23℃) 425 MPa ASTM D790
热性能 额定值 单位制 测试方法
脆化温度 -37 ASTM D746A
熔融峰值温度 169 ASTM D3418
电气性能 额定值 单位制 测试方法
表面电阻率 >1.0E+14 ohm ASTM D257
体积电阻率 >1.0E+14 ohm·cm ASTM D257
介电常数(1 MHz) 7   ASTM D150
可燃性 额定值 单位制 测试方法
UL 阻燃等级 V-0   UL 94
极限氧指数(3.00 mm) 100 % ASTM D2863
Warranty, Limited Remedy, and Disclaimer: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance of a 3M product in a particular application. User is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s method of application. Unless a different warranty is specifically stated in the applicable product literature or packaging insert, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price.
 
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damages arising from the 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence or strict liability.
 
Technical Information: Technical information, recommendations, and other statements contained in this document or provided by 3M personnel are based on tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed. Such information is intended for persons with knowledge and technical skills sufficient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information.
希普能工程塑料
相关材料
上一页:PVDF 32008/0009 颗粒料,挤出级           下一页:PVDF 31508/0003 颗粒料,挤出级