LNP THERMOCOMP PC DF0089

添加时间：2013-02-25 信息来源：http://www.kingoflotto.com/ 作者：苏州希普能塑料

LNP™ THERMOCOMP™ Compound PC DF0089

Also known as:LNP™ Thermocomp™ Compound DF-1008 FR LEX Product reorder name:DF0089
LNP THERMOCOMP* DF0089 is a compound based on Polycarbonate resin containing Glass Fiber, Flame Retardant. Added features of this material include: Flame Retardant.

Property
TYPICAL PROPERTIES(1)

MECHANICAL	Value	Unit	Standard
Tensile Stress,break	1340	kgf/cm²	ASTM D 638
Tensile Strain,break	1.7	%	ASTM D 638
Tensile Modulus,50mm/min	139900	kgf/cm²	ASTM D 638
Flexural Stress	1940	kgf/cm²	ASTM D 790
Flexural Modulus	120200	kgf/cm²	ASTM D 790
Tensile Stress,break	130	MPa	ISO 527
Tensile Strain,break	1.6	%	ISO 527
Tensile Modulus,1mm/min	12400	MPa	ISO 527
Flexural Stress	203	MPa	ISO 178
Flexural Modulus	12500	MPa	ISO 178
IMPACT	Value	Unit	Standard
Izod Impact,unnotched,23℃	54	cm-kgf/cm	ASTM D 4812
Izod Impact,notched,23℃	9	cm-kgf/cm	ASTM D 256
Instrumented Impact Energy @ peak,23℃	82	cm-kgf	ASTM D 3763
Izod Impact,unnotched 80104 +23℃	46	kJ/m²	ISO 180/1U
Izod Impact,notched 80104 +23℃	10	kJ/m²	ISO 180/1A
THERMAL	Value	Unit	Standard
HDT,1.82 MPa,3.2mm,unannealed	137	℃	ASTM D 648
HDT/Af,1.8 MPa Flatw 80104 sp=64mm	138	℃	ISO 75/Af
PHYSICAL	Value	Unit	Standard
Density	1.589	g/cm³	ASTM D 792
Density	1.58	g/cm³	ISO 1183
FLAME CHARACTERISTICS	Value	Unit	Standard
UL Compliant,94V-0 Flame Class Rating(3)(4)	1.6	mm	UL 94 by SABIC-IP
Source GMD,last updated:2004/09/28

Parameter Injection Molding	Value	Unit
Drying Temperature	120	℃
Drying Time	4	hrs
Maximum Moisture Content	0.02	%
Melt Temperature	305-325	℃
Front-Zone 3 Temperature	320-330	℃
Middle-Zone 2 Temperature	310-320	℃
Rear-Zone 1 Temperature	295-305	℃
Mold Temperature	80-110	℃
Back Pressure	0.2-0.3	MPa
Screw Speed	30-60	rpm
Source GMD,last updated:2004/09/28